MintForged
Design a Custom Medal You Can 3D Print
Start from a logo, photo, or artwork, set the medal's diameter and thickness, add a design on the back, and download a two-sided STL ready for your printer or a casting shop.
What this workflow supports
- Round medals with diameter and thickness set in millimeters
- Front and back designs exported together in one STL
- Generate artwork with the built-in AI image tool if you don't have a design
- Height map export for CNC-cut dies and engraving
Artwork that reads on a medal
Medals are small, so bold shapes beat fine detail. Logos, crests, and simple illustrations translate best.
- Keep text large and short
- Use a clean, high-contrast version of the logo
- Leave a margin so the design clears the rim
- Preview at the real diameter before exporting
Printing or producing the medal
Resin printers give crisp small medals directly. For metal, the print can serve as a casting master, and the files help a minting vendor see your intent.
- Resin printing suits 30 to 60 mm medals
- Drill a ribbon hole after printing, or cut one in your slicer
- Paint, metal-coat, or cast for a finished look
- Confirm specifications with your vendor before a production run
Frequently asked questions
Can I put a different design on each side?
Yes. Add an optional back design and both sides are exported together in one STL.
What if I don't have artwork yet?
You can generate artwork inside the Studio with the built-in AI image tool, then turn it into relief.
How much does it cost?
Designing and previewing is free. Your first export is free with a confirmed account, then $4.99 per project, or $29 a month for 12 exports.